H+Wlogo4.gif (8461 bytes)

 

Home of
REBOUNDER.jpg (9003 bytes)®

X-Probe Fixture Kit

H+W Test Products has developed, with close assistance directly from QA Technology's, a REBOUNDER® test fixture for the new X-ProbeTM socketless test probe. Specifically designed to work with all series of test platforms. All REBOUNDER® test kits feature two separate "Co-Active Seals”TM,Quick Twist® Locking Guide Pins, and boards constructed of fine weave G10/FR4, increasing testing reliability and accuracy while simplifying finishing, debugging, and maintenance.   All H+W products are backed - up with our “Test-Assured”TM one year warranty -- in writing -- and SAME DAY SHIPMENTS.


H+W Test Products Rebounder® X-Probe test fixtures have four plates.
Each plate is drilled differently by the fixture finisher.

 

—TOP PLATE: This FR4/G10 material plate is available in a non-ESD or as an ESD-Impregnated version. This plate needs to be drilled with tight tolerance holes to guide the X-ProbeTMtips accurately to the targets on the PCB.

 

—PROBE PLATE: This FR4/G10 material plates uses H+W's standard, patented Rebounder®design. This is the same probe plates used in our reqular test fixture kits. This plate needs to be drilled with holes slightly larger than the X-Probe's body. These small clearance holes prevent binding, misalignment or float. They help guide the X-ProbeTMaccurately to its target.

 

—BEEF PLATE: This lightweight, easy to drill material helps guider the X-ProbeTM. This plate needs to be drilled with holes slightly larger than the X-Probe's body.

 

—BACK PLATE: This high density, FR4/G10 material plate insures maximum strength, minimizes board flex and greatly improves pointing accuracy. This plate needs to be drilled with the required diameter holes to retain the X-ProbeTMInterconnect Pin.

 

For specific information on QA Technology's X-ProbeTM, visit www.qatech.com

 

 

How to order

To order REBOUNDER X-Probe fixtures, select the fixture you require from an H+W product bulletin and specify the fixture model number. Insert an "X" between the "R" and the second letter.

Example: RG22001A becomes RXG22001A
Example: RH32001A becomes RXH32001A




Available Sizes

Standard Fixture

 Agilent Fixtures

G2 Kits: 14"x18" Max UUT
G3 Kits: 18"x22" Max UUT
G4 Kits: 18"x28" Max UUT
G5 Kits: (2)8"x14" Max UUT
G6 Kits: (2)10"x18" Max UUT

RH32 Kits: 15.8"x14.1" Max UUT, (small) Single Bank
RH38 Kits: 15.8"x28.3" Max UUT, (large) Double Bank

 

Test Systems Availability
Agilent (HP) 3065, 3070
Teradyne (GenRad) 2270, 2271, 2276, 228X
Teradyne 88X, 18XX
Teradyne Spectrum 88XX
Teradyne Teststation LH
Test Research, Inc. TR-8001
H+W System Non-Specfic


 

Specifications subject to change without notice.
Consult H+W for Latest Design Changes.
REBOUNDER®, Rebound Strip, Quick Twist, Test-Assured and Co-Active Seals are trademarks or registered trademarks of H+W Test Products, Inc.
Patent Number 5,430,385 & 6,054,869