H+Wlogo4.gif (8461 bytes)

Home of
REBOUNDER.jpg (9003 bytes)®

Accessories

H+W Mechanical Fixtures

 Opens Testing Components GenRad Receiver Adapter Plates

H+W Mechanical Fixture Accessories

 Side Access Units Fixture Receiver Adapters
Fixture Interface Receivers & Contact Blocks Adapter Box Fixtures Handles
UUT Overclamps Prop Rod Assemblies

 

 H+W Mechanical Fixtures
H+W Test Products has developed a series of inexpensive mechanical test fixtures. These fixtures are designed for testing low volume runs of printed circuit boards or prototype applications requiring approximately 150 test points. All H+W products are backed - up with our "Test - Assured" one year warranty-in-writing and SAME DAY SHIPMENTS.


H+W Mechanical Fixtures
Part # Maximum Board Size Overall Fixture Size # Pressure Pins
FC20001A
FC21001A
FC22001A

 5" x 9" (127 x 229)
9" x 13" (229 x 330)
13" x 17" (330 x 432)

 8" x 12" (203 x 305)
12" x 16" (305 x 406)
16" x 20" (406 x 508)

 15
15
30

H+W Mechanical Fixture Accessories

Adapter Box Fixtures

Part #

Description

FC20003A
FC21003A
FC22003A

  8" x 12" (203 x 305)
 12" x 16" (305 x 406)
 16" x 20" (406 x 508)

 

Pan Riser Assembly

Part #

Description

FC20202
FC21202
FC22202

  4" (102) Pan Riser
 4" (102) Pan Riser
 4" (102) Pan Riser

Riser Block Assembly

Part #

Description

FC20501
FC20601

 1/2" (13) Riser Kit All fixtures
 1" (25) Riser Kit All fixtures

 

Front Latch Assembly

Part #

Description

FC20403

 FC20-1-2 Fixtures
 

Rear Hinge Assembly

Part #

Description

FC20406

 FC20-1-2 Fixtures

 

Pressure Finger Assembly

Part #

Description

*STD0001
  STD0002

15 (2.5" (65) Studs/30 Nuts
15 (3.5" (89) Studs/30 Nuts

* included with each kit
H+W Mechanical Fixtures Options:
  • ESD Treatment
  • G10 (FR4) Push Plates

 

H+W Mechanical Fixtures Include:
  • Side Handles
  • Probe Plate Latch Assembly
  • Probe Plate Hinges
  • Self Positioning Springs in Pan 
  • Self Positioning Lexan Plate Springs

 

  • Drilling Alignment Holes in both Plates 
  • 4" (102) Deep Pans, Expandable to 8" (203)
  • Insulated Nylon Pressure Fingers
  • Removable Base Pan Panels

 

 

Fixture Interface Receivers & Contact Blocks
H+W TEST PRODUCTS has developed a series of receivers that utilize a modular, spring-loaded interface that allows the user to purchase only the number of interface points required for their present need. These receivers are available in the following styles: 1280 points in 160 point increments and 1700 points in 170 point increments. Both receiver types are available in either 0 or 30 degree styles. H+W maintains a complete inventory of 160 and 170 point receiver and fixture contact blocks. Both the receiver and fixture blocks are available in multiple wire termination options.

 

 

UUT Overclamps
H+W Test Products has developed a series of overclamps that are adjustable in the X,Y and Z axis. These overclamps distribute pressure on the surface on the UUT. Perfect for vacuum fixtures, mechanical fixtures and Opens Testing applications. Overclamps open to 90 degrees. All overclamps are made out of aluminum and steel for strength against probe force and deflection. Nylon pressure fingers are included with each unit and optional steel pins with nylon tips are available.

 


H+W Manual Overclamps
Standard
Overclamps		 Lexan Plate
Overclamps		 Minimum Overall
Fixture Size		 Maximum Board
Size		 No.
Rails		 No.of
Pins
FC40101A
 
FC40102A
 
FC40103A
 
FC40104A
 
FC40105A
 		 FC40301A
 
FC40302A
 
FC40303A
 
FC40304A
 
 
 		 12" x 16"
(304x405)
16" x 20"
(405x507)
20" x 24"
(507x608)
16" x 20"
(405x507)
16" x 20"
(Dual Well)		 9.6" x 7.5"
(243x190)
13.6" x 9.5"
(344x241)
17.6" x 13.5"
(446x342)
17.6" x 9.5"
(446x241)
2-4.3" x 0.5"
(109x241)		 5
 
5
 
6
 
5
 
5
 		 18
 
18
 
22
 
18
 
18
 

 

Opens Testing Components
H+W Test Products has developed a product line of components for Opens Testing. Designed for GenRad's Opens Express*, Agilent (HP)'s TestJet*, and Teradyne's Multiscan* Opens Testing applications, these components and H+W's full line of overclamps and vacuum top access units provide a full range of opens testing options.

 

hwp6sm.jpg (17464 bytes) hwp16.jpg (56531 bytes)

*Opens Express is a registered trademark of GenRad, Inc.
*TestJet is a registered trademark of Agilent (HP) Co.
*Multiscan is a registered trademark of Teradyne, Inc.

GenRad Mux Board Kit GenRad Buffer Board Kit GenRad Sensor Plate Kit GenRad Sensor to
Buffer Wire Kit

hwp7sm.jpg (14972 bytes)

FC58601 (Old GenRad
Opens Express* system)		 FC58602 (to be used with
FC58601)		 FC58603 (to be used with
FC58601/2 or FC58608)		 FC58604 (to be used with
FC58602 and FC58603)
Includes:
  • (1) H192001 Mux Bd, GR P/N 9004-0400-02
  • (4) H009065 .500" Nylon Spacer
    DFS
    SDFDSF
    SDFSD
    SD
    DSS
    SDF
 Includes:
  • (1) H192002 Buffer Bd, GR P?N 9004-0335-01
  • (1) H192112 10 pin Buffer to Mux Bd. Ribbon Cable
    F
    DFG
    D
    DFG
    DF
Includes:
  • H192003 8"x11" Plate, for up to 70 1"x1" sensors
  • (1) H163011 8"x11"x.125" GPPS Mounting Material
  • (1) H004425 8"x11"x.250" Foam Poron
  • (1) H004438 8"x11"x.375" Foam Poron
Includes:
  • (25) H192113 6" wire with connector, Sensor to Buffer Bd.
    EW
    WER
    W
    WER
    W
    EW

    WER
Opens Testing Sensor
Plate Mounting Ki		 GenRad OFM Board Kit GenRad Sensor to
OFM Wire Kit		 Opens Testing Sensor
Plate Mounting Kit

hep8sm2.jpg (14764 bytes)

FC58606 (Can be used on
H+W Overclamps)		 FC58608 (New GenRad
Opens Express* system)		 FC58605 (to be used
with FC58608)		 FC5607 (to be used w/
FC58606 or Lexan Plate Overclamp)
Includes:
  • (10) FC58612 Mounting Brackets
  • (10) FC58613 Mounting Leg
  • (10) H008105 Nylon Wire Clip
  • (30) H009062 Nylon Washer
  • (10) H009064 .375" Nylon Spacer
  • (10) H009065 .500" Nylon Spacer
  • (10) H114620 6-32x1.25" Soc. Hd. Scr.
  • (30) H116604 6-32x2.50" Button Hd. Scr.
 Includes:
  • (1) H192004 OFM Bd., GR P/N 9004-0482-00
  • (1) H192111 30 pin OFM Bd. Ribbon Cable
  • (4) H009065 .500" Nylon Spacers
    FHFG
    FH

    GJ
    FG
    FGH
    FG
    FGH
    FG
Includes:
  • (25) H192114 12" wire with connector, Sensor to OFM Bd.
    FHGFH
    GHFGH
    FGHF
    FGFG
    FGHFG
    FGHGH
    FGHF
    FGHG
    FGFG
    FGFG
    F
    FGH
    FG
    FGH
 Includes:
  • (10) FC58614 Nylon Mounting Stud
  • (20) H009250 Nylon 1/4-20 Hex Nut ghjghjghjghjghjh
    dgdfgdgdfgfg
    dfgdfgdfgg
    fgdfgdfg
    fgdfgfgf
    fgd
    DFGDGDG
    DFGDFGD
    DFGDF
    DFGDF
    DG
    DF

 

Side Access Units
H+W Test Products has developed a series of mechanical side access units that are designed to contact UUT fingers and/or I/O connectors.
These units can be used with either vacuum or mechanical test fixtures.

 

Part Number Maximum Usable Size
FC50107A
FC50111A		 7" (180)
11" (280)

 

Prop Rod Assemblies
STDO100 Prop Rod assemblies can be used with any H+W test kit. Prop Rods should always be considered for larger kits or kits with large amounts of added weight on the top.

 

hwp11.jpg (26078 bytes)

GenRad Receiver Adapter Plates
AP2272 or AP2282 For use with GenRad 2272 & 228X testers. The adapter plates allow the smaller 15 and 18 row interface panels to be used on 33 row receivers.

 

hwp13.jpg (21358 bytes)

 

 

 

Adapter Box Fixtures
H+W Test Products has developed a series of Adapter Box Fixtures that are available in any model and/or size for which H+W offers vacuum fixtures, Adapter box Fixtures are a nonvacuum version of our standard vacuum test fixture. They are frequently used in M.D.A. and functional applications. The basic design consists of our standard ATE system pan and interface with a .375" sheet of G10 material mounted to the top. The G10 plate mounting is hinged the same as our standard vacuum test fixtures. All Adapter Box Fixtures are available for same day shipments.

 

hwp15sm.jpg (21583 bytes)